Aventurine Link (6) - Add 1 – Green Opal 6mm Glass Crystal Bicone, 1 – Silver-Plated 1.5x4mm Beaded Rondelle, 1 – Aventurine 12mm Semiprecious Round, 1 – Silver-Plated 1.5x4mm Beaded Rondelle, and 1 – Green Opal 6mm Glass Crystal Bicone to an eyepin. Create a 90º angle in the Eye Pin above the last bead you added. Using a pair of round nose pliers hold the Eye Pin in the angle you created and wrap the eye pin around the pliers creating a loop. Trim the excess eye pin next to the 90º angle you first created making a matching loop in the eye pin. Repeat 5 times.
Green AB Twist Link (6) - Add 1 – Green AB 22mm Faceted Glass Crystal Twist to an eyepin. Create a 90º angle in the Eye Pin above Glass Crystal Twist. Using a pair of round nose pliers hold the Eye Pin in the angle you created and wrap the eye pin around the pliers creating a loop. Trim the excess eye pin next to the 90º angle you first created making a matching loop in the eye pin. Repeat 5 times.
Create Links
Assemble Necklace
1. Open 1 – Silver-Plated 8mm Jump Ring; add the loop of the lobster clasp and the loop of 1 – Aventurine Link. Close the jump ring.
2. Open 1 – Silver-Plated 8mm Jump Ring; add the other loop of the Aventurine Link from Step 1 and the loop of 1 – Green AB Twist Link. Close the jump ring.
3. Open 1 – Silver-Plated 8mm Jump Ring; add the other loop of the Green AB Twist Link from Step 2 and the loop of 1 –Aventurine Link. Close the jump ring.
4. Open 1 – Silver-Plated 8mm Jump Ring; add the other loop of the Aventurine Link from Step 3 and the loop of 1 – Green AB Twist Link. Close the jump ring.
5. Open 1 – Silver-Plated 8mm Jump Ring and add the other loop of the Green AB Twist Link from Step 4. Close the jump ring.
6. Open 1 – Silver-Plated 5mm Jump Ring and add the 6 ½ inch length of 3.5mm Flat Cable Chain, the 6 ¼ inch length of 2.7mm Flat Cable Chain, the 6 inch length of 2.25mm Flat Cable Chain, and the Silver-Plated 8mm Jump Ring you added in Step 5.
Click here to add text.7. Close the 5mm Jump Ring.
8. Open 1 – Silver-Plated 5mm Jump Ring and add the 6 ½ inch length of 3.5mm Flat Cable Chain, the 6 ¼ inch length of 2.7mm Flat Cable Chain.
9. Close the 5mm Jump Ring
10. Open 1 – Silver-Plated 8mm Jump Ring; add the Silver-Plated 5mm Jump Ring from Steps 8 and 9 and the loop of 1 – Green AB Twist Link. Close the jump ring.
11. Open 1 – Silver-Plated 8mm Jump Ring; add the other loop of the Green AB Twist Link Step 10 and the loop of 1 – Aventurine Link. Close the jump ring.
12. Open 1 – Silver-Plated 8mm Jump Ring; add the other loop of the Aventurine Link from Step 11 and the loop of 1 – Green AB Twist Link. Close the jump ring.
13. Open 1 – Silver-Plated 8mm Jump Ring; add the other loop of the Green AB Twist Link Step 12 and the loop of 1 – Aventurine Link. Close the jump ring.
14. Open 1 – Silver-Plated 8mm Jump Ring; add the other loop of the Aventurine Link from Step 13 and the loop of 1 – Green AB Twist Link. Close the jump ring.
15. Open 1 – Silver-Plated 8mm Jump Ring; add the other loop of the Green AB Twist Link Step 14 and the loop of 1 – Aventurine Link. Close the jump ring.
16. Open 1 – Silver-Plated 8mm Jump Ring; add the other loop of the Aventurine link from Step 15 and 1 – Silver-Plated 8mm Jump Ring (make sure the jump ring is closed).
You’re done!! This pattern makes a necklace that is approximately 24 inches long.
